Custom Metal Fabrication in Southeast Michigan

We offer free quotes and come to you. Available Monday-Friday 8 AM-6 PM and Saturday mornings.

Precision Fabrication Built to Spec Every Time

Fabrication means cutting, bending, shaping, and joining raw metal to build something new to spec. It's different from repair welding. We use it for structural handrails, ADA-compliant ramps, security barriers, equipment frames, brackets, and gates. Commercial and municipal clients often need it to meet code or accessibility rules. Residential clients need it when off-the-shelf products just don't fit.

Our process starts with a consultation and measurement, then material selection. Next comes cutting and shaping with plasma cutters, angle grinders, shears, press brakes, and mandrel benders. Then we weld and assemble, finish the piece, and install or deliver it. A quality result has clean lines and tight fits. Rushing any stage leads to gaps, weak joints, or a part that doesn't sit right.

Cost and complexity depend on a few factors: material type and grade, project complexity and tolerance, the number of components, and surface finishing like painting, powder-coating, raw, or brushed. Whether installation is included also affects the price. Every project is different, so request a free quote instead of guessing at pricing.

Laser cutting metal sheet with bright sparks in an industrial workshop

A quality fabrication provider leaves clean, consistent welds with no porosity or undercut. Measurements are accurate and tight. Material certifications get provided where structurally required, and surface prep is done right. A good provider reviews your specs before cutting. A poor provider's work shows up later as a wobbling handrail or a cracked structural bracket.

Residential Services

Custom fabrication for homeowners across Southeast Michigan, from structural steel to finishing touches.

Steel-framed house under construction with exposed wooden trusses and red brick walls on a sunny day

Steel House Beams

Steel house beams give a home structural support for load-bearing walls, additions, and open-concept renovations. We fabricate beams to spec and install them to meet local building codes, so your home stays structurally sound through the project and beyond. AMS Welding LLC works with homeowners and contractors across Southeast Michigan on beam fabrication and installation. Request a free quote to get your project measured.

Handrailing

Custom handrailing gives your steps, porch, or deck a safe grip and a finished look that off-the-shelf kits rarely match. We measure your space and fabricate a handrail to fit exactly, whether that is a straight run or a curved staircase. AMS Welding LLC builds handrailing for homes across Southeast Michigan with clean welds and a fit that lasts. Request a free quote and we will come take measurements.

Stairway with metal railings leading up to a rooftop against a cloudy sky
Blue-tinted translucent roof panels with dark beams above a garden view

Porches

Steel-framed porch structures hold up to Michigan weather better than wood alone and give your home a sturdy base for years to come. We fabricate porch framing, supports, and railing components to fit your home's exact dimensions. AMS Welding LLC handles porch fabrication for homeowners who want a structure built to last. Request a free quote and tell us about your project.

Stairways

Steel stairways stand up to heavy use and outdoor exposure while giving your home a clean, modern look. We fabricate stringers, treads, and railing systems to fit tight spaces, steep grades, or exterior entries where wood tends to wear out fast. AMS Welding LLC builds stairways for homeowners across Southeast Michigan who need a durable, code-compliant fit. Request a free quote and we will measure your space.

Metal spiral staircase with grated steps and railings in a dimly lit industrial setting
Black metal fence beside a sunlit grassy path with blurred trees in the background

Fences

Custom steel fencing gives your property security and a defined boundary without the maintenance headaches of wood. We fabricate fence panels and posts to your exact layout, whether that is a full perimeter or a single accent section. AMS Welding LLC builds residential fencing across Southeast Michigan to spec and to code. Request a free quote and let us know your property layout.

Gates

Custom steel gates give your driveway or entry a secure, finished feature built to your exact opening and style. We fabricate swing and slide gates with clean welds and hardware fit for daily use in Michigan weather. AMS Welding LLC builds residential gates across Southeast Michigan, from simple designs to more detailed ironwork. Request a free quote and tell us about your entryway.

Gray slatted metal fence receding along a walkway beside a yellow building

Commercial Services

Heavy-duty fabrication and repair for contractors, fleets, and commercial operations across Southeast Michigan.

Curved metal handrail beside steps, with blurred blue-gray background and warm light reflection

Handrails

Commercial handrails have to meet code and hold up to daily foot traffic, which means precise fabrication and a strong install. We build handrail systems for stairwells, ramps, and walkways that pass inspection and stand up to years of use. AMS Welding LLC works with contractors and property managers across Southeast Michigan on handrail projects of any scale. Request a free quote and we will review your specs.

Prototypes

Prototype fabrication turns a design or concept into a working metal part you can test and refine before committing to a full production run. We work from drawings, samples, or rough specs to build a functional prototype in steel, aluminum, or stainless steel. AMS Welding LLC supports businesses across Southeast Michigan developing new products or custom equipment. Request a free quote and tell us what you are building.

Stacked metal I-beams with hollow rectangular ends, shown in close-up at an industrial site.
Close-up of a yellow heavy-duty vehicle’s front axle and large tires with blue suspension parts

Dump Body Repair

Dump bodies take a beating from daily loads, and cracked seams or worn floors need a repair that holds up to the next job, not just the next inspection. We repair dump body floors, sides, hinges, and structural supports on site or in the shop to keep your truck working. AMS Welding LLC serves fleets and contractors across Southeast Michigan with fast turnaround on dump body repair. Request a free quote and describe the damage.

Trailer Repair

A cracked frame, broken hitch, or damaged ramp on a trailer takes it out of service until the repair gets done right. We handle structural trailer repair, including frame, ramp, and hitch work, for utility, equipment, and flatbed trailers. AMS Welding LLC brings mobile repair to your site so your trailer is back in service fast. Request a free quote and tell us what needs fixing.

Mechanic welding under a vehicle, with sparks flying in a garage
Worker welding metal in a workshop, with bright blue sparks and smoke.

Machinery Repair

Broken brackets, cracked housings, and worn mounts on production or shop machinery can shut a line down until they are fixed. We repair machinery components on site or in the shop, matching the material and weld process to what the part needs to hold up under load again. AMS Welding LLC keeps commercial machinery running for businesses across Southeast Michigan. Request a free quote and tell us what is down.

Heavy Equipment and Hard Facing

Heavy equipment takes constant wear on buckets, blades, and ground-engaging parts, and hard facing adds a wear-resistant layer that extends the life of those components. We repair heavy equipment and apply hard facing to buckets, teeth, and structural wear points to keep machines productive longer. AMS Welding LLC serves contractors and fleets across Southeast Michigan with mobile heavy equipment service. Request a free quote and tell us what needs attention.

Worker welding metal on heavy machinery, with bright blue sparks in a construction site.
Barbed wire atop a tall metal fence against a blue sky

Fences

Commercial fencing has to secure a property line, meet site requirements, and hold up to years of exposure without constant upkeep. We fabricate and install steel fencing for commercial properties, storage yards, and job sites across Southeast Michigan. AMS Welding LLC builds fencing to spec, whether that is a perimeter run or a security section. Request a free quote and let us know your property layout.

Gates

Commercial gates control access to a property or job site and need to hold up to daily use without failing at the worst time. We fabricate swing and slide gates built for commercial durability, including security and access-control applications. AMS Welding LLC serves businesses and contractors across Southeast Michigan with gate fabrication and installation. Request a free quote and tell us about your entry point.

Black metal gate/fence across a concrete driveway or ramp beside a building wall.

Common Questions About Custom Fabrication Projects

  • How long does a custom fabrication project usually take?

    Most fabrication projects take one to three weeks from consultation to installation, depending on complexity and material availability. Simple brackets or gates move faster. Larger jobs like ADA ramps or multi-component handrail systems take longer. We give you a clear timeline with your free quote so you know what to expect.

  • Can AMS Welding LLC handle ADA-compliant ramp and handrail fabrication for a business?

    Yes. We fabricate ramps and handrails built to meet ADA and local code requirements for commercial and municipal clients. We review your specs and site conditions before cutting any material, so the finished structure meets accessibility standards and passes inspection.

  • Do I need to provide my own materials for a fabrication project?

    No. We can source the steel, aluminum, or other metal your project needs. If you already have materials on hand, we're happy to work with those too. We'll talk through material options and grades during your free quote so you get the right fit for your budget.

  • What happens if the finished fabrication doesn't fit the space as planned?

    We take careful measurements up front specifically to avoid this. If an adjustment is ever needed, we come back and make it right at no extra runaround. Our goal is a piece that fits the first time, and we stand behind our fit and workmanship.

Ready to Start Your Fabrication Project?

Get a free quote and find out what your project will take. No obligation, no pressure.